37
36
instructional videos willowpump.com | customer care 1-888-WILLOW-3 Willow Breast Pump Instructions for Use
5. PAUSE PUMP
To pause while pumping, press Pump/Pause button. Press it again to resume pumping.
Pump stopped automatically? This happens when:
White Pulsing Indicator – Auto-Pause:
After 25 minutes of continuous pumping, Pump will pause.
To continue pumping, press Pump/Pause button.
White Solid Indicator – Full Milk Bag:
When Milk Bag is full, Pump stops pumping. Break latch, remove Pump, perform Flip to Finish
(reference Section 7B PUMPING - Flip to Finish) and replace Milk Bag. To resume pumping,
attach a new Milk Bag and follow instructions starting with Section 7B. PUMPING.
6. BREAK LATCH & REMOVE PUMP
fig 6a Pause Pump
by pressing Pump/
Pause button.
fig 6b Unhook bra and
bend forward; support
bottom of Pump with
one hand.
fig 6c Break latch
by placing a few
fingers between
Pump and breast.
fig 6d Tilt Pump
away from
breast, keeping
Flange side up.
TIP: There will be some milk in the Flange; the next step will help you capture it.
To Next Page
Loading...
