To Next PageTo Next Page
Need help?Do you have a question about the Wilo Initial JET and is the answer not in the manual?
General| Type of liquid | Clean water |
|---|---|
| Maximum operating pressure | 6 bar |
| Minimum fluid temperature | 5°C |
| Connection diameter | 1 inch |
| Protection class | IP44 |
| Power Consumption | 0.75 kW |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Weight | 12 kg |
| Mains connection | 1~230 V/50 Hz |
| Connection Inlet/Outlet | G 1 inch |
Specifies the required qualifications and responsibilities for personnel.
Outlines risks from ignoring safety instructions, including injury and damage.
Provides guidance on selecting an accessible, frost-protected location for pump installation.
Details requirements for suction and delivery pipes, including diameter, length, and air prevention.
Explains electrical connection procedures, safety precautions, and required components.
Guides through the process of filling and venting the pump before operation.
Advises on proper pump operation, including limits on zero flow operation.
Covers maintenance for motor bearings and mechanical seals, noting pre-lubrication.
Provides solutions for issues like no delivery, vibration, overheating, motor failure, low pressure, and irregular flow.
Provides information on proper disposal and recycling of electrical and electronic products.
