To Next PageTo Next Page
Need help?Do you have a question about the Wilo IPL Series and is the answer not in the manual?
Details the suitability of IPL and DPL series for light industrial applications.
Lists key technical specifications and parameters for the pump series.
Provides a general overview of the pump series and its types.
Explains the components and format of the pump's serial code.
Explains symbols used in instructions to warn of personal injury or damage risks.
Emphasizes the need for qualified personnel for pump installation and service.
Outlines potential consequences of not following safety precautions, including injury or damage.
Stresses adherence to accident prevention regulations and electrical safety.
Details responsibilities for ensuring proper inspection and assembly by qualified personnel.
Warns against unauthorized modifications and stresses using original spare parts.
States that operating safety is guaranteed only if used according to instructions and within limits.
Describes the single-stage, low-pressure centrifugal pump design and drive motor options.
Lists the items included in the pump's scope of supply.
Details requirements for siting the pump, including environment, accessibility, and pipe stress.
Guides on proper electrical connection, power supply checks, and wiring diagrams.
Explains the process of filling and venting the pump and system for proper operation.
Discusses mechanical seal behavior during run-in and potential maintenance needs.
Provides step-by-step instructions for removing and replacing the mechanical seal on IEC motor versions.
Details the suitability of IPL and DPL series for light industrial applications.
Lists key technical specifications and parameters for the pump series.
Provides a general overview of the pump series and its types.
Explains the components and format of the pump's serial code.
Explains symbols used in instructions to warn of personal injury or damage risks.
Emphasizes the need for qualified personnel for pump installation and service.
Outlines potential consequences of not following safety precautions, including injury or damage.
Stresses adherence to accident prevention regulations and electrical safety.
Details responsibilities for ensuring proper inspection and assembly by qualified personnel.
Warns against unauthorized modifications and stresses using original spare parts.
States that operating safety is guaranteed only if used according to instructions and within limits.
Describes the single-stage, low-pressure centrifugal pump design and drive motor options.
Lists the items included in the pump's scope of supply.
Details requirements for siting the pump, including environment, accessibility, and pipe stress.
Guides on proper electrical connection, power supply checks, and wiring diagrams.
Explains the process of filling and venting the pump and system for proper operation.
Discusses mechanical seal behavior during run-in and potential maintenance needs.
Provides step-by-step instructions for removing and replacing the mechanical seal on IEC motor versions.
General| Type | Inline |
|---|---|
| Operating Pressure | 10 bar |
| Fluid Temperature | -10°C to +110°C |
| Motor Protection | IP X4D |
| Connection Voltage | 230V / 400V |
| Temperature Range | -10°C to +110°C |
| Connection Type | Flange connection |
| Material | Cast iron, stainless steel, bronze |
| Application | Heating, cooling, industrial |
