Description en
Installation and operating instructions Wilo-RAIN3 37
Menu no. Parameter /
info
Min. Max. Text Default Unit Ac-
cess
level
Description
5.63
Dry run tap
water mode
duration
1 180 20 s 2 Time in TWM to build up minimum pres-
sure
5.64
Dry run rain
water mode
duration
1 180 30 s 2 Time in RWM to build up minimum pres-
sure
5.70
Maximum
pump cycles
per hour
1 60 35 1/h 2 Raise an alarm when pump is starting
more frequently than that threshold
Menu no. Parameter /
info
Min. Max. Text Default Unit Ac-
cess
level
Description
6.00
Alarm 1 The submenu contains the ten most re-
cent error codes for alarms that have ap-
peared in the panel during operation
6.01
Quit alarm Off - Reset OFF 1 Use this item to reset all acknowledge-
able alarms
6.02
Alarm his-
tory 0 (new-
est item)
0 2550 0 1 The most recent error code
6.03
Alarm his-
tory 1
0 2550 0 1 The second most recent error code
6.04
Alarm his-
tory 2
0 2550 0 1 The third most recent error code
6.05
Alarm his-
tory 3
0 2550 0 1 ...
6.06
Alarm his-
tory 4
0 2550 0 1 ...
6.07
Alarm his-
tory 5
0 2550 0 1 ...
6.08
Alarm his-
tory 6
0 2550 0 1 ...
6.09
Alarm his-
tory 7
0 2550 0 1 ...
6.10
Alarm his-
tory 8
0 2550 0 1 ...
6.11
Alarm his-
tory 9 oldest
item
0 2550 0 1 The tenth most recent error codes
Menu no. Parameter /
info
Min. Max. Text Default Unit Ac-
cess
level
Description
7.00
Setup 1 Global parameter regarding the panel and
installation
7.01
Unlock
parameter
change
Level 1 - Level 2 -
Level 3
Level 1 1 Unlock all parameters that can be
changed throughout the menu If not un-
lock parameter can only be read If there
are no more action happens on the touch
display in the next 6 min the parameters
will be locked again
7.04
Serial num-
ber
0 9999
9999
9
- The unique ID of the panel should be set
here to help with identification of each
panel. The ID cannot be changed any-
more.
To Next Page
Loading...
