Wilo RAIN3 Series - Installation

en Installation
38 WILO SE 2020-02
Menu no. Parameter /
info
Min. Max. Text Default Unit Ac-
cess
level
Description
7.05
Equipment
number
0 9999
9999
9
0 3 The unique ID of the panel should be set
here to help the service identification of
each panel (9 digits)
7.06
Main screen
actions
OFF - ON ON 2 Enable operation action on main screen
7.09
Reset alarm
history
OFF - Reset OFF 3 Use this item to clear the alarm history
7.10
Load factory
defaults
OFF - ON OFF 3 Load the factory settings, except all
counters and menu 5.04
7.11
Reset pump
info
OFF - Main pump -
Cistern pump
OFF 3 Reset the info of MP or CP as running
time and switch cycles
7.12
Menu lan-
guages
English, French,
German, Czech,
Slovak, Dutch
English 2 Selecting the menu language
7.20
E140 Max-
imum pump
cycles per
hour
0 6553
5
1 Counter of error code E140 with the
latest time stamp
7.21
E40.1 Pres-
sure sensor
fault
0 6553
5
1 Counter of error code E40.1 with the
latest time stamp
7.22
E062.1 Dry
running
RWM
0 6553
5
1 Counter of error code E062.1 with the
latest time stamp
7.23
E062.2 Dry
running
TWM
0 6553
5
1 Counter of error code E062.2 with the
latest time stamp
7.24
E141 Max.
runtime
pump
0 6553
5
1 Counter of error code E141 with the
latest time stamp
7.25
E66.0 Break
tank over-
flow
0 6553
5
1 Counter of error code 66.0 with the latest
time stamp
7.26
E065 Cistern
backflow
0 6553
5
1 Counter of error code E065 with the
latest time stamp
7.27
E66.1
Cistern
overflow
0 6553
5
1 Counter of error code E66.1 with the
latest time stamp
7.28
E66.2
Cistern high
water alarm
0 6553
5
1 Counter of error code E66.2 with the
latest time stamp
7.29
E40.0 Level
sensor fault
0 6553
5
1 Counter of error code E40.0 with the
latest time stamp
7.30
Reset error
counters
OFF - Reset OFF 3 Reset counters of all errors
7 Installation
In compliance with the rules and regulations in force, the installation and the electrical
connection must be exclusively performed by qualified personnel.
DANGER
Physical injuries
The applicable regulations for the prevention of accidents must be complied with.