se C T i o n 2 �1 — un C r aT i n g al e x i a V
17
Wilson Audio Specialties
access to the bottom side. Slide the other hand under the Upper Array for support, and
carefully lift the enclosure out of the crate.
8. The cloth grilles are attached to the enclosures. Detach the grilles from the enclosure
and remove the protective plastic covering the grille.
9. Place the Upper Array with an odd serial number on the left side of the room and the
Upper Array with an even serial number on the right side of the room with the drivers
facing the wall (to protect the drivers while uncrating).
Note: After the system is set up, keep the shipping crates for future shipping needs.
To Next Page
