EasyManuals Logo

Wilson Electronics weboost DRIVE REACH FLEET User Manual

Default Icon
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
DRIVE REACH FLEET PROFESSIONAL VEHICLE SIGNAL BOOSTER KIT
2
______
Step 1: Drill Cable Entry Hole
To Your Vehicle
Identify a location for the NMO outside antenna on
the top of your vehicle that is:
Near the center of the roof
At least 12 inches away from any other antennas
At least 12 inches away from any windows
(for best performance install on top of vehicle)
Do a ‘soft install’ before drilling the hole for the
cable entry.
Set up the system by routing the cable through
an open door or window, completing the setup
instructions, verifying the system works as desired,
and then drilling the hole.
12 inches away from windows
(including sunroofs)
Good NMO Outside
Antenna Placement

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wilson Electronics weboost DRIVE REACH FLEET and is the answer not in the manual?

Wilson Electronics weboost DRIVE REACH FLEET Specifications

General IconGeneral
BrandWilson Electronics
Modelweboost DRIVE REACH FLEET
CategoryExtender
LanguageEnglish

Related product manuals