Wilson Electronics weboost DRIVE REACH FLEET - Step 3: Mount In-Vehicle Antenna

DRIVE REACH FLEET PROFESSIONAL VEHICLE SIGNAL BOOSTER KIT
6
The location should be at least 18 inches but no more than 36
inches from where the cellular device will be used. Use the
Velcro® adhesive strip or the 2-sided adhesive strip provided
and attach to the side of the antenna labeled “MOUNTING
SIDE”. Then mount to desired location.
Identify a place to mount the in-vehicle antenna, either on
the side of the seat or on the dash and mount.
______
Step 3: Mount In-Vehicle
Antenna
In-Vehicle Antenna
Dash Mount
Velcro® strip
In-Vehicle Antenna
Seat Mount