Wilson Electronics weBoost Drive Reach RV - Page 7

(STEP 1 cont.)
Mount Outside Antenna. L-Bracket
Mount and hardware is provided to
mount to ladder or pole. If installing
with Spring, the Side Exit Adapter must
be used. Then route 25' RG-6 cable
from inside RV to Outside Antenna.
NOTE: Outside Antenna location must
be within reach of the booster with the
25' coax cable. The system performs
best with maximum vertical and
horizontal separation.
(j '
....... . ..
L-Bracket Mount &
& hardware ~ Ii
~ ,, , ......... . .
Side Exit
Adapter
6
add thread
locker
Spring
(optional)
6
add thread
locker
ladder rail
■