Wilson Electronics WEBOOST DRIVE X OTR User Manual

7
VEHICLE SIGNAL BOOSTER DRIVE X OTR
______
Step 4: Connect Coax Cables
To Booster
Connect the cable from the outside antenna to the port labeled
“Outside Antenna” on the Drive X OTR booster.
Connect the cable from the in-vehicle antenna to the port
labeled “Inside Antenna” on the booster.
from Outside Antenna
from Inside Antenna
NOTE: Bracket can be used to fasten booster in a specific location if desired.

Wilson Electronics WEBOOST DRIVE X OTR Specifications

General

Brand	Wilson Electronics
Model	WEBOOST DRIVE X OTR
Category	Extender
Language	English