EasyManuals Logo

Wilson Electronics WEBOOST DRIVE X OTR User Manual

Wilson Electronics WEBOOST DRIVE X OTR
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
DRIVE X OTR VEHICLE SIGNAL BOOSTER
2
______
Step 1: Select Mounting
Location & Assemble The
Antenna
Depending on the type of truck, there may be built-in antenna
mounting points. If the vehicle does not have built-in mounting
points, the antenna includes a 3-way mount that will work on
vehicles with mirror rails. The antenna will also work with third
party CB antenna mounts.
Select mounting location on vehicle. The antenna can be
mounted in any CB mount or antenna mounting point on the
vehicle. For best performance mount the antenna above the
metal cab (it does not need to be above cab wind deflector).
Typical Antenna
Mounting Points
NOTE: Mount at least 12 inches from any other antennas. Free of obstructions.
NOTE: If the vehicle is using two CB antennas co-phase wiring, removing one
antenna will cause reduced performance of the remaining CB antenna.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wilson Electronics WEBOOST DRIVE X OTR and is the answer not in the manual?

Wilson Electronics WEBOOST DRIVE X OTR Specifications

General IconGeneral
BrandWilson Electronics
ModelWEBOOST DRIVE X OTR
CategoryExtender
LanguageEnglish

Related product manuals