To Next Page
M
Marcia WeeksJul 29, 2025
How to fix a Wilton 2221VS when the spindle does not turn?
- CChristina SmithJul 29, 2025
If the spindle of your Wilton Power Tool isn't turning, there are several potential causes: * The motor overload protector may have tripped. If so, press the motor overload reset button. * The circuit breaker may have tripped. Try resetting the circuit breaker. * A branch circuit breaker might have tripped, or a fuse blown. In this case, reset the branch circuit breaker or replace the fuse. * There could be an open wire in the switch circuit, which requires repairing the open circuit. * The switch itself may be defective, necessitating a switch replacement. * The drive belt might be broken, requiring you to replace it.
General
