3. How to view the file？
• 1.View on the camera: turn on the switch to "SETUP", press "MODE" continuously to find the file
playback page, use "UP" or "Down" to switch to view pictures or videos
• 2. Use the attached video cable/AV cable to view:
① Connect the camera to the TV through the 3.5mm AV cable
② Turn on the camera, and slide the operating mode selector to "SETUP".
③ After connecting, the camera enters the mode of playback and the LCD turns off.
The camera recordings would be shown on the TV
3.Use USB cable to view:
Connect the camera to the computer through a USB cable. Once you have a successful connection,
a new driver named mass storage would appear on the computer. Photos and videos can be found
in "DCIM/100-MEDIA" in the mass storage and can be copied to the computer.
Note： please don't disconnect the cable or take out the memory card when copying photos/videos.
4.View on APP (Hunting Cam Pro)
5. Use SD card reader to view (not included)
To Next Page
Loading...
