support01@wimius.com
EN 10
3.Install on the Ceiling
Keep the projector vertical and towards the mid of the projector screen, and keep the projection image at
on the screen.
1. To adjust the tilt base, unscrew the support rod at the bottom of the projector, see the below picture.
2. For the Ceiling mount, there is 1 hole at the bottom of the projector Please turn the projector upside down,
then you can nd the ceiling mount holes as shown in the picture below.
NOTE: The hanging bracket or ceiling mount stand is not packaged.
ALSO NOT SUPPORT 4-Legged
Hoisting
Height Adjustment Machine Feet
To Next Page
Loading...
