Wimius K9 - Page 30

support01@wimius.com
EN27
WiMiUS K9 projector has 6 interfaces, HDMI ports*2/USB ports*2/3.5mm headphone output/RJ45
Please select the correct connecting port to connect your device (PC, Phone, DVD Player, Sound bar, USB,
PS4,etc.)
Select the USB signal source, the machine will detect them automatically.
• Select the required category “photos” “music” or “video” in the main interface, and press the “OK” key on the
remote control to enter the corresponding category.
• According to the programs to choose :“photos” “music” or “video”.
• Choose the le you want to play, and press the key “OK” to play or pause the le. (You cannot enter the
required category without connecting a USB disk.)
Note: For the “Ofce Suite” option, PPT/TXT les cannot be played or presented normally.
1. Connect to the computer and K9 projector with the HDMI cable (Included).
2. Select the HDMI source to project any les on your computer;
3. On your laptop, hold down the key “Win+P” board keys to change your display mode.
1.USB Multimedia Connecting
2.Connecting with PC
SIGNAL LINES CONNECTION