Cleaning/Disinfecting
Steps:
1. Wipe the WMP-17F with a dry clean cloth.
2. Operate with manufacturer’s instructions or hospital protocol.
Cautions:
Do not immerse or rinse the WMP-17F and its peripherals. If
you accidentally spill liquid on the device, disconnect the
unit from the power source. Contact your Biomed regarding
the continued safety of the unit before placing it back in
operation.
Do not spray cleaning agent on the chassis.
Do not use disinfectants that contain phenol.
Do not autoclave or clean the WMP-17F or its peripherals
with strong aromatic, chlorinated, ketone, ether, or Esther
solvents, sharp tools or abrasives. Never immerse electrical
connectors in water or other liquids.
To Next Page
Loading...
