What does it mean if the LED blinks four times and stays on with Wincor Nixdorf Printer?
If the LED on your Wincor Nixdorf Printer blinks four times and then stays on, it could mean the thermistor is out of range. Allow the print-head to cool down. If this occurs on power up, contact your authorized service representative.
Why is the LED blinking slowly and steadily on my Wincor Nixdorf TH210 Printer?
If your Wincor Nixdorf Printer's LED blinks slowly and steadily, it may be due to a non-Wincor power supply or an incorrect max power setting. Try switching to a Wincor power supply and changing the max power setting. If these don't solve the issue, stop using the printer.
What does it mean if my Wincor Nixdorf TH210 Printer beeps and flashes a green LED?
If your Wincor Nixdorf Printer beeps and flashes a green LED in various combinations, it indicates a serious condition. Stop using the printer.
Why is my Wincor Nixdorf Printer printing inconsistently with no two-color print?
If your Wincor Nixdorf Printer is printing inconsistently and not producing two-color prints, the paper type used may not match the printer's settings. Print a diagnostic form and verify the paper type setting is set to 0, 1, 4, or 5.
Why is a vertical column of print missing on my Wincor Nixdorf TH210 receipts?
If a vertical column of print is missing from your Wincor Nixdorf Printer, it indicates a serious condition with the printer electronics. Stop using the printer.
General| Printing Method | Direct Thermal |
|---|---|
| Print Width | 72 mm |
| Print Resolution | 203 dpi |
| Paper Width | 80 mm |
| Paper Roll Diameter | Up to 83 mm |
| Power Supply | 24 VDC |
| Type | Receipt printer |
| Connectivity | USB, RS232, Ethernet |
Device compliance with EU directives regarding EMC and low voltage.
Notes the device has received UL and cUL symbols.
Details FCC compliance for Class B devices and potential interference.
Covers correct installation, unauthorized modifications, and authorized repairs.
Advises against touching hot print heads, cutters, and ESD-sensitive components.
Lists precautions for printer placement, environment, power connection, and liquid handling.
Explains the function of the paper feed button for advancing paper and accessing menus.
Describes the meaning of the green LED status light.
Explains the audible feedback (beeps) from the printer.
Describes the purpose of the connector cover for protection and strain relief.
Step-by-step instructions for loading and changing the paper roll.
Explains how to configure paper low notification and path width.
How to connect cash drawer cables to the printer.
Details connecting RS-232C and USB communication cables.
Specific steps for connecting the USB cable, including warnings.
Explains how to access and modify printer configuration settings.
Describes the LED indicator for low paper and setting adjustments.
Explains the LED indication for no paper and the consequences of continued operation.
Diagnoses printer issues based on LED blinking patterns and tones.
Diagnoses common printing problems like light print or paper jams.
Troubleshoots issues where the printer does not turn on or stops functioning.
How to order printer parts, accessories, and paper from the manufacturer.
Specifies the required dimensions and properties for thermal paper.
Lists recommended paper grades from qualified manufacturers.
Lists Wincor Nixdorf compatible cash drawers and associated cables.
Lists available communication cables with model and part numbers.
Details the part number for the printer wall-mount kit.
Lists key technical specifications like interfaces, memory, and print resolution.
Describes paper detection, audible tones, and LED status lights.
Details cash drawer connection and the built-in paper cutter.
Lists options pre-installed on the printer, like interface and color.
Lists optional accessories available for purchase, like wall mounts and power supplies.
To Next Page
