TH320
Quick Reference
Warranty Information
Wincor Nixdorf guarantees a limited warranty
engagement for 12 months beginning with the date of
delivery. This warranty engagement covers all those
damages which occur despite a normal use of the
product.
Damages because of
- improper or insufficient maintenance,
- improper use of the product or unauthorized
modifications of the product,
- inadequate location or surroundings
will not be covered by the warranty.
All parts of the product which are subject to wear and
tear are not included in the warranty engagement.
Connect only power supply units and cables approved
by Wincor Nixdorf.
Manufacturers Certification
The device complies with the
requirements of the directive
2004/108/EC with regard to
‘Electromagnetic compatibility" and
RoHS directive 2011/65/EU.
Therefore, you will find the CE mark on the device or
packaging.
Tested Safety
The device has received the UL
and cUL approval.
FCC-Class A Declaration
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful inter-
ference when the equipment is operated in a com-
mercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a re-
sidential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense. Modifications not
authorized by the manufacturer may void users
authority to operate this device. This class A digital
apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe A est conforme à
la norme NMB-003 du Canada.
Choose a location
The TH320 printer requires minimal counter space
and may be set on or near the host computer.
With the RS232C interface, you can place the printer
up to 50 feet (15m), for USB interface up to 15 feet
(5m) and for Powered USB 12.5 feet (3.8m) from the
host computer and power supply.
Do not place the printer in a dusty environment or
anywhere that spillage of drinks or other liquids can
occur.
Be sure the printer is on a level surface and that there
is enough room to open the receipt cover to change
the paper and to open the front cover to change the
impact printer’s ribbon cassette.
Be sure to leave adequate space at the rear the
printer for connecting and accessing the cables.
Be sure to locate the printer away from sources of
magnetic interference. If the printer has a built in
Magnetic Ink Character Recognition (MICR) check
reader (option), you may need to make additional
adjustments to the printer’s location. Devices such as
CRT monitors or large metal surfaces can affect the
printer’s magnetic field and cause intermittent check
reading errors.
Unpack the printer
The packing materials protect the printer and help
prevent damage.
Be sure to save all the packaging materials - including
the plastic bag and the cardboard supports found in
the slip path.
To Next Page
Need help?
General
