04
Product Overview
Grip
Brake handle
Derailleur
Pole Height Adjuster
Vertical folding clasp
Headlight
Front fender
Front Suspension
Front disc brake
Front disc
Tire
Middle Folding
Clasp
Pedal
Crankset
Wheel Chain
Kickstand
Rear disc
Motor
Rear disc brake
Back fender
Back light
Back seat
Seat tube
Seat
Seat post binder
Key hole
Battery
Bell
LED Display
Gear Shift
Assembly
If you can't install bike accessories well, we recommend taking your new bike to a bikeshop
for assembly and inspection. If you are willing to assemble the bike yourself, be sure to follow
all instructions, properly adjust gears and brakes, and set tire pressure.
Seat
1. Open the quick release lever by swinging the lever open and outward fully.
2. Move the seat up and down by sliding the seat postin out of the seat tube.
3. Adjust the seat and the head of the seat is parallel with the top tube.
4. Close the quick release lever using your palm or finger.
Unfold
1. Be careful not to position your fingers between the latch and the frame. You may get
injured if you do it.
2. Unfold the rear wheel/ section and hold your e-bike up right with the kickstand.Push the
latch closed so that it's parallel with the bike's frame then turn the latch lock down towards
the latch to lock it in place.
3. Open the kick stand and place the entire bike.
To Next Page
Loading...
