05
Pedals
1. Locate the right-side/ left side pedal, which is marked "R," "L," should have an "R" "L"
sticker attached.
2. Thread the right pedal onto the right crank gently by hand, turning clockwise. Then tighten
pedal by allen wrench.
3. Thread the left pedal onto the left crank gently by hand, turning counter-clockwise.Then
tighten pedal by allen wrench.
4. Check the chain alignment. Rotate the right pedal and crank toward the back of the bike
as though pedaling backward. Watch the chain and ensure the chain runs through the
drivetrain (the rear cog, chain tensioner, and around the front chainring) smoothly.
1. Open the vertical folding
clasp to fold the handle part.
1. Turn the safety switch.
2. Turn the key. 3. The battery compartment can be
withdrawn for charging.
4. Connect the charger to charge. 5. Charging.
3. Done, to make it smaller,
you can remove the saddle.
2. Open the middle folding
clasp to fold the bike.
Folding
Battery Key Positions
To Next Page
Loading...
