Windoware MOTOWARE - 2. INITIAL SET-UP; 2.1 Pair motor with controller

MOTOW ARE
MOTOW ARE
MOTOW ARE
motoware
MOTOWARE
MOTOWARE
MOTOWARE
BLINDS & AWNINGS
Motoware Automation Programming Instructions | Vertical Awning Motor
2.1 Pair motor with controller
2. INITIAL SET-UP
(Complete the pairing process in less than 10 seconds)
Select channel on controller.
IMPORTANT
Please see our separate
instructions on the 15 Channel
Remote for further information
if required.
!
Press P2 on existing controller.

Release button immediately after
1 x BEEP
Press P2 on existing controller.

Release button immediately after
1 x BEEP
Press the UP button.

Release button immediately after
2 x BEEP
Motor confirmation
3 x JOG
Switch power on the motor.