MAINTENANCE - VACUUM SHOES
86037880 CHARIOT EXTRACTOR 11/15/08
4-7
VACUUM SHOES
The dual offset vacuum shoes are designed to
extract soiled solution from the carpet. The plastic
vacuum shoe glides minimize damage to carpet and
flooring.
MAINTENANCE
The vacuum shoes should be removed and cleaned
daily to ensure maximum solution recovery.
VACUUM SHOE REMOVAL
1. Remove hopper from left side of machine by
rotating the hopper retaining plate and sliding
the hopper out.
2. Unscrew retainer knob from right side vacuum
shoe.
3. Pull vacuum shoe forward until it is free from
pivot pin.
4. Remove vacuum hose from top of vacuum shoe
5. Repeat to remove left side vacuum shoe.
6. Inspect or repair as necessary and reinstall.
TO CLEAN VACUUM SHOES
1. With the vacuum shoes in the raised position,
turn key switch “off”.
2. Remove vacuum shoes.
3. Flush vacuum shoes from top with water. If
necessary, clean blockage from narrow opening
with knife, scraper or similar device.
4. Vacuum shoe glides may be removed for
cleaning (or replaced) by removing the three
pins that secure them to metal vacuum shoes.
To Next Page
Loading...
Need help?
General
