Winegard Carryout User Manual

Quick Start Guide
For up-to-date information on receiver compatibility
and programming, visit www.winegard.com/receivers
Before using your Carryout
®
antenna, there may be some initial steps
required to set up your Carryout antenna for use with your receiver. This
is a one-time process. Follow the steps here for a typical installation. If
you have additional questions, consult the full Users Manual.

Winegard Carryout Specifications

General

Compatibility	DIRECTV, DISH, Bell TV
Power Source	12V DC
Product Type	Satellite TV Antenna
Mounting Style	Portable
Weight	12 lbs
Warranty	1 year limited warranty
Operating Temperature	-22°F to 140°F

Summary

Quick Start Guide

Programming the Carryout Antenna

DISH Service Configuration

Set dip-switches for DISH service provider.

DIRECTV Factory Preset

Antenna is pre-configured for DIRECTV service.

Wiring the Carryout Antenna

Connecting the Power Supply

Connect antenna power cord to a 12V source.

Coaxial Cable Connections

Connect coax cable from receiver to the antenna's main port.

DISH Receiver Setup Procedures

Initial Receiver Settings

Dish Pointing and Switch Test

Navigate receiver menus for dish pointing and switch testing.

DIRECTV Receiver Setup Procedures

Satellite Acquisition Process

Power antenna and allow it to acquire satellite signals.

Satellite Setup Selection

Choose 3-LNB/3-Satellites and Multiswitch options.

Product Specifications Overview

Safety and Handling Guidelines

Provider Switch Settings

DIRECTV, DISH, and Hybrid Settings

Dip-switch configurations for DISH, DIRECTV, and Hybrid.

Bell TV and Eastern Arc Settings

Switch settings for Bell TV and DISH Eastern Arc.

Detailed DISH Receiver Setup

Pre-Setup Cable Disconnection

Disconnect coax cable from receiver's 'Sat In' before setup.

Switch Test and Verification

Perform Check Switch test and confirm SW64 setting.

Detailed DIRECTV Receiver Setup

Accessing Receiver Setup Menu

Satellite Menu Navigation

DIRECTV Satellite Acquisition and Setup

Selecting Satellite and Switch Options

Powering Antenna and Signal Search

Finalizing DIRECTV Receiver Setup

Installation Status Review

Data Feed and Remote Configuration

Setup Completion and Viewing

Operating the Carryout Antenna

Initial Power-On Sequence

Antenna Signal Acquisition Process

Connect power, antenna searches for satellites.

Post-Acquisition Steps

Preparing for Travel or Storage

Troubleshooting Common Issues

Antenna Fails to Move or Search

DIRECTV Primary Satellite Not Found

DISH Channel or Receiver Problems

Advanced Troubleshooting Steps

Receiver Unresponsiveness Solutions

Resolving No Picture or Signal