Web Operation (continued)
Update Software
When first setting up the Winegard
Gateway it is recommended to check for
software updates the first time the system
is connected to an Internet source. It is also
recommended to check for updates every
couple months for fixes and added features.
In the Update Software page, you can check
for the latest software version, check for a
modem update, or restore the system to the
original factory configuration.
Restore/Return To Factory Defaults
You can return the system to factory
defaults either by clicking the Restore
button on the Update Software page, or
by holding the reset button located on the
backside of the Gateway between the power
cable and the Red cable connector #2 for
30 seconds, as shown on page 3.
Note: To retain all passwords and
name changes during updates, click
Keep Settings.
WARNING: All changes will be
lost and the unit will return to
the factory default SSID and
password.
15
To Next Page
Loading...
Need help?
General
