Important Information • SpecificationsPage 1
Important Information
This manual contains important information, warnings, tips, and recommendations on assembling and installing Model
MT-SM10 rear cab mount for use with the Winegard Carryout G2+, Winegard Pathway X1, Winegard DuraSat, Winegard
ConnecT WF1xT and Winegard ConnecT 4G1xT antennas. Model MT-SM10 rear cab mount is only intended for installation
on a truck, and the instructions within only apply for installation on a truck for use with the Winegard Carryout G2+,
Winegard Pathway X1, Winegard DuraSat, Winegard ConnecT WF1xT or Winegard ConnecT 4G1xT antennas.
Please read the information in each section of this manual before proceeding to assemble and install the rear cab mount.
Information in this manual is based on knowledge at time of printing. Winegard reserves the right to make updates,
additions and improvements to the manual or product based on additional knowledge or feedback.
Disclaimer: Although every effort has been made to ensure that the information in this manual is correct and complete, no
company shall be held liable for any errors or omissions in this manual. Information provided in this manual was accurate
at time of distribution. If the antenna and/or mount do(es) not function as expected, please contact Winegard by emailing
help@winegard.com or calling 1-800-788-4417.
Warnings
Text with this symbol contains important safety information that should be followed in order to reduce the risk of property
damage, personal injury, and/or death. Heed the warnings throughout the manual.
Tips
Text with this symbol contains information, recommendations, and/or hints that may be helpful during the installation and/
or assembly process.
Specifications
For use with Winegard Carryout G2+ (GM-6000 and
GM-6035), Winegard Pathway X1 (PA-2000, PA-2035,
PA2000R, PA2035R), Winegard DuraSat (GM-6000, GM-
6035), Winegard ConnecT WF1xT (WF-150T) or Winegard
ConnecT 4G1xT (WF-200T) antennas.
Height (once assembled): 12.8″, Width: 9.8″
Extends 16.5″ from cab
Mount weight: 13.4 lbs
Adjustable leveling surface: 90°±10° every 1.25°
Includes two options for positioning satellite antennas on
the mount or one option for the ConnecT antennas
Powder-coated
Paintable
•
•
•
•
•
•
•
16.5″
9.8″
12.8″
To Next Page
Loading...
Need help?
General
