wingtra One - Page 12

STEP2:GeotagImagesontheTablet
Afterthedownloadissuccessful,clickon"GeotagImages".ThenpoweroffWingtraOne,getSDcard
fromthecameraandinserttheSDcardtoyourtablet.SelecttheimagedirectoryontheSDcardthat
containsyourimages,andclick"StartTagging".Bepatient!Geotaggingimagescantakeseveralminutes.
ThegeotagswillbedirectlysavedtotheEXIFmetadataoftheimages.
Youcanplanthenextflightinparallelandcontinuecollectingmoredata,whilegeotaggingtakesplacein
thebackground.
STEP3:Inspect/SaveImages
Toinspectyourimages,opentheMyFilesApp,navigatetoSDcard/DCIM/andintoyourprojectfolder.
Openanimageinthe/Taggedsubfolderandselect"Gallery"asimageviewer.
TheSDcardshouldprovideenoughspaceforseveralflights(upto3000-4000JPEGimages),youcan
continueflyingdirectlyorinserttheSDcardonalaptopandsavethedataaftereveryflight.
10.UsetheGeotaggedImagesinyourPostprocessingToolchain
CopythegeotaggedimagesfromtheSDcardtoyourcomputerandusethemwithyourfavorite
postprocessingtoolchain.Alwaysusetheimagesfromthe/Taggedsubfolder.
QuickStartGuide
12