English AM90
FILTER CARE
6. Cleaning the filters
Intervals between filter cleaning may vary depending on the air quality.
Use a vacuum cleaner or soft brush to clean
the Pre-filter. If it is excessively soiled, rinse
in room temperature water.
•
Do not use detergent or soap.
•
Allow the filter to dry for 24 hours or
more before using.
※
If the pre-filter becomes damaged or in any way needs replacement:
Please contact Winix
(877)-699-4649
www.winixamerica.com
NOTICE
•
Do not use benzene, alcohol, or other volatile fluids, which
may cause damage or discoloration.
•
The Pre-filter is reusable after cleaning, ensuring it is
completely dry.
•
Do not use hot water over 104
F or volatile fluids such as
paint thinner.
•
After washing the filter, allow it to dry completely in a well
ventilated area. Otherwise, it may develop a bad odor.
To Next Page
Loading...
