• Do not use benzene, alcohol, or other volatile fluids, which
may cause damage or discoloration.
The Pre-filter is reusable after cleaning, ensuring it is
completely dry.
Do not use hot water over 40
o
C or volatile fluids such as
paint thinner.
After washing the filter, allow it to dry completely in a well
ventilated area. Otherwise, it may develop a bad odour.
6.
Cleaning the filter
Intervals between filter cleaning may vary depending on the air quality.
①
Use a vacuum cleaner or soft brush to
clean the Pre-filter. If it is excessively
soiled, rinse in room temperature water.
• Do not use detergent or soap.
• Allow the filter to dry for 24 hours or
more before using
※
If the pre-filter becomes damaged
or in any way needs replacement:
Please contact your local
dealer
To Next Page
Loading...
