To Next PageTo Next Page
Need help?Do you have a question about the Winix ZERO and is the answer not in the manual?
General| Filtering capability | Cigarette smoke, Fine dust, Pollen |
|---|---|
| Number of filter stages | 4 |
| Filter cleaning indicator | Yes |
| Product color | Black, White |
| Built-in display | No |
| Noise level | 51 dB |
| Certification | CE, RoHS, WEEE |
| Air purify rate | - m³/h |
| Suitable for room area up to | 35 m² |
| Power consumption (max) | 70 W |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth | 208 mm |
|---|---|
| Width | 380 mm |
| Height | 600 mm |
| Weight | 7000 g |
Step-by-step guide for removing the front panel and accessing the filters.
Information on when to service and replace the pre-filter, carbon, and HEPA filters.
Details how the air purifier automatically adjusts fan speed based on detected air quality.
Explains Sleep mode, including reduced fan speed and disabled air quality indicator.
Instructions on how to manually set the fan speed to Low, Medium, High, or Turbo.
Guide on setting the unit to run for a specified period of time.
Information on enabling or disabling the PlasmaWave feature for air purification.
Explanation of the LED light indicating current indoor air quality levels.
Details on pre-filter, carbon, and HEPA filters and their recommended service needs.
Step-by-step guide for removing installed filters from the air purifier unit.
Instructions for unpacking and preparing new replacement filters before installation.
Instructions for correctly installing new HEPA, carbon, and pre-filters.
How to reset the filter indicator light after replacing the filters.
Method for cleaning the pre-filter using a vacuum or brush, including drying.
Steps to clean the particle sensor lens and intake area using a damp cotton swab.
Guidelines for wiping down the unit's exterior and cleaning the interior with a vacuum.
