To Next PageTo Next Page
Need help?Do you have a question about the Winix ZERO-N and is the answer not in the manual?
General| Noise level | 47 dB |
|---|---|
| Certification | CE, RoHS, WEEE |
| Automatic mode | Yes |
| Air purify rate | - m³/h |
| Number of speeds | 3 |
| Suitable for room area up to | 15 m² |
| Product color | Grey, White |
| Built-in display | No |
| Power consumption (max) | 40 W |
| Filtering capability | Cigarette smoke, Fine dust, Pollen |
Weight and Dimensions| Depth | 207 mm |
|---|---|
| Width | 350 mm |
| Height | 470 mm |
| Weight | 6200 g |
Details the items included in the product packaging for setup and initial use.
Explains the function of each button, LED indicator, and the light sensor on the unit's control panel.
Provides instructions on ideal unit placement, spacing, and environmental conditions for safe and effective operation.
Guides users through the process of removing and installing the air purifier's fabric pre-filter, carbon filter, and HEPA filter.
Outlines recommended service intervals and replacement timing for the fabric, carbon, and HEPA filters.
Essential safety instructions and warnings to prevent injury, electric shock, and damage to the unit during operation.
Step-by-step instructions on how to connect the power, turn on the unit, and understand initial operating modes like Auto.
Explains how the unit automatically adjusts fan speed based on detected air quality.
Details the Sleep Mode, including automatic low fan speed and disabled air quality indicator.
Describes how to manually select fan speeds (Low, Medium, High) and disables Auto Mode.
Explains the color-coded LED indicator that shows the current indoor air quality level.
Describes the function of each filter type and provides guidance on their expected lifespan and optimal use.
Instructions on how to reset the filter indicator and clean the fabric pre-filter using vacuum or washing.
Step-by-step guide on how to clean the particle sensor lens and intake area using a damp cotton swab.
Instructions for cleaning the unit's exterior surfaces and interior components with a damp cloth and vacuum.
Addresses common problems like the unit not turning on, not working in Auto Mode, noise, or overheating plugs.
Addresses issues such as strange smells, weak fan strength, poor purification, and dim display panels.
