Winix ZERO-N - INITIAL OPERATION; First-Time Setup and Operation


English ZERO-N
INITIAL OPERATION
①
Insert the power cord into an electrical
outlet.
②
Press the ‘Power’ button.
NOTE
ˍ
During the first 30seconds of power up, the Air Quality
Indicator will cycle through Blue, Amber and Red colors. The
Particle Sensors take approximately 30seconds to gauge the
air quality in the environment, after which normal operation
will begin.
③
By default, when the unit first powers on,
the mode will be set to Auto enabled.
ˍ
When in Auto mode, the fan speed will
be automatically adjusted according to
the environments air quality.
NOTE
ˍ
In Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
ˍ
When the unit is running, you may hear a chirping or buzzing
sound.
ZERO-N.indb 11 2018-04-26 오후 5:38:54