6.4.3 Identify cylinder
You can identify the cylinder if you do not know which cyl-
inder it is. The information about the cylinder is displayed
once it is identified.
Precondition:
n Masterkey has been linked to the app.
–
Ä
Chapter 6.2 “Register” on page 66
Fig. 57: Identify cylinder
1. Open Cylinder menu.
2. Touch '+' (1) in the Cylinder menu.
3. Touch Identify cylinder (2).
4. Insert Masterkey (3) in the cylinder.
ð
The cylinder specifications are shown after the key
has been scanned.
Show cylinder
Manage locking system
23.05.2018blueCompact Electronics locking system76
To Next Page
Loading...