6.4.4 Check the cylinder battery charge status
Prerequisites:
n Masterkey has been linked to the app.
–
Ä
Chapter 6.2 “Register” on page 66
n User is in the Cylinder menu.
Fig. 58: Check the cylinder battery charge status
1. Select cylinder (1).
2. Insert Masterkey (2) in the cylinder.
ð
The Masterkey (2) is linked to the cylinder and the
cylinder overview is shown.
3. Check the cylinder battery charge status (3). Replace
the cylinder battery if the display says low or replace.
Ä
Chapter 9.2 “Replace batteries” on page 116
Open cylinder view
Manage locking system
23.05.2018 blueCompact Electronics locking system 77
To Next Page
Loading...