Winnebago Journey User Guide

8-1
5 - DASH / AUTO
SECTION 8 – ENTERTAINMENT
VIDEO SELECTION SYSTEM
The standard video selection system allows
you to switch the antenna, cable TV, satellite TV
system, or VCR/DVD signal to any TV set
location in the coach.
This means one person can watch a program
coming in on the roof antenna on the bedroom
TV while another person watches a satellite or
cable TV program or video on the front TV. See
following.
To Watch Broadcast TV (Antenna)
• Press TV ANT button on MAIN TV section of
video selection box.
To Watch Cable TV
• Press CABLE TV button on MAIN TV
section of video selection box.
To Watch Satellite TV (Dish)
-If Equipped
• Press SAT button on MAIN TV section of
video selection box.
To Watch DVD
• See “Audio-Video System Basic Operation”
elsewhere in this section for basic DVD and
home theater setup.
To Watch VCR (if self-installed)
• Press VCR button on MAIN TV section of
video selection box.
To Watch Rear/Bedroom TV
-If Equipped
• Video selection for the rear TV is similar to
front TV viewing except all selections are
made with buttons in the TV2 grouping.
VCR Group Buttons
• The buttons in the VCR group are for
selecting the signal input to a self-installed
VCR for taping programs.
• If you wish to tape a program from cable TV,
press CABLE button. If the program is on the
dish, press SAT, and so forth.
High Definition Video Selection
System
(if equipped with 2nd Main TV)
If your coach is equipped with a 2nd main TV,
you will have a high definition video selection
system which allows you to watch standard or
high definition video from multiple sources on
multiple TV’s at the same time. You can select
either DVD, Satellite, or Aux AV Component.
TV’s connected to this system are the main TV
and 2nd main TV. See following.
Video Selection Box
High Definition Video Selection Box
(if equipped with 2nd Main TV)

Winnebago Journey Specifications

General

Brand	Winnebago
Model	Journey
Category	Motorhomes
Language	English