Winnebago Via 25Q User Manual

9-5
SECTION 9 –
FURNITURE AND SOFTGOODS
2. Turn the Inflate/Deflate switch “counter-
clockwise” to the DEFLATE position for
complete air removal.
NOTE: Pump will automatically turn off and the
Inflate/Deflate switch will automatically
return to the OFF position upon
complete deflation.
3. Fold mattress edges back 6 inches and foot
end of mattress back 20 inches.
4. Grasp the pull strap and proceed to bring sofa
all the way up.
5. Reinstall rectangular seat back cushion.
6. Reinstall two front seat back cushions.
Further Information
See the air bed manufacturer’s user guide
provided in your InfoCase for complete operating
instructions, safety precautions, and repair
information.
DINETTE/BED CONVERSION
–If Equipped
(Typical view – your coach may differ)
Dinette to Bed
1. Release the catch on the table leg brace and
fold the leg up against the bottom of the table.
2. Remove the table from the wall support
bracket by lifting the end of the table. Then
lower the table to rest on the cleats attached to
each dinette bench.
NOTICE
To avoid mattress damage, fold edges
back 6 inches and foot end back 20
inches before returning to sofa position.

Winnebago Via 25Q Specifications

General

Brand	Winnebago
Model	Via 25Q
Category	Motorhomes
Language	English