Servicing and maintenance
8.1.2 Self-cleaning programme at the end of the working day
The machine is equipped with a self-cleaning programme that assists you when you are cleaning the inside
of the machine.
Proceed in accordance with Figures C1 to C20.
Terminating the self-cleaning programme
Press this button.
The display is lit in red.
The machine is filled again.
8.1.3 Cleaning the interior
Ensure that there are no rusty foreign objects in the machine which can cause even "rust-free
stainless steel" material to start rusting. Rust particles can come from non-rust-free cleaners,
damaged wire racks or non-rust-protected water lines.
The following materials must not be used for cleaning:
High-pressure cleaner
Detergents containing chlorine or acid
Cleaning sponge or wire brush containing metal
Abrasives or abrasive cleaners
Remove dirt with a brush or a cloth.
8.1.4 Cleaning the exterior of the machine
Clean the operating panel and display with a damp cloth.
Clean the external surfaces using a stainless steel cleaner and stainless steel polish.
To Next Page
Loading...
