To Next Page

To Previous Page

HWT9053-RS485 | manual v0707 | http://wiki.wit-motion.com/english

- 15 -

Step 3. Judge the result--confirm if there is 1g on Z-axis acceleration

1. After1 ~ 2 seconds, the three axial acceleration value of the module is

about 0, 0，1, the X and Y axis Angle is around 0°. After calibration, the x-y

axis Angle is accurate.

Note: When putting the module horizontal, there is 1g of gravitational

acceleration on the Z-axis.

Questions and Answers:

Need help?

Do you have a question about the WiT HWT9053 and is the answer not in the manual?

WiT HWT9053 Specifications

General