WiT HWT9053 User Manual

HWT9053-RS485 | manual v0707 | http://wiki.wit-motion.com/english
- 5 -
1.1 Warning Statement
 Putting more than 36 Volt across the sensor wiring of
the main power supply can lead to permanent damage
to the sensor.
 VCC cannot connect with GND directly, otherwise it
will lead to the burning of the circuit board.

For proper instrument grounding: use WITMOTION
with its original factory-made cable or accessories.

Do not access the I2C interface.

For secondary developing project or integration: use
WITMOTION with its compiled sample code.

WiT HWT9053 Specifications

General

Brand	WiT
Model	HWT9053
Category	Measuring Instruments
Language	English