Need help?Do you have a question about the WiT WT901BLECL BLE5.0 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Connectivity | Bluetooth 5.0 |
| Acceleration Range | ±2g/±4g/±8g/±16g |
| Operating Voltage | 3.3V-5V |
| Operating Temperature | -40°C to +85°C |
| Model | WT901BLECL BLE5.0 |
| Sensor | 9-axis IMU |
| Gyro Range | ±250°/s, ±500°/s, ±1000°/s, ±2000°/s |
| Accuracy (Static) | 0.1° |
| Output Frequency | up to 200 Hz |
| Current Consumption | <15mA |
Access video demos, software downloads, and contact information.
Introduction to the WT901BLECL, its features, and advantages.
Essential safety warnings and understanding of LED indicators.
Steps for installing the app, granting permissions, and sensor pairing.
Procedures for accelerometer and magnetic field calibration via the app.
Multi-connection, data recording, and app configuration.
Installation, connection, and managing device settings on iOS.
Connecting the sensor via USB, BLE adapter, and driver setup.
Introduction to the PC software's main menu and interface elements.
Step-by-step guide for calibrating the accelerometer.
Procedure for calibrating the magnetic field sensor.
Automatic gyroscope calibration and resetting Z-axis angle.
Methods for recording, playback, and setting installation direction.
Adjusting bandwidth and selecting 6-axis/9-axis algorithms.
Information about the latest version of the PC software.
Connecting multiple sensors and configuring data settings.
To Next Page
