WiT WT901BLECL BLE5.0 User Manual

WT901BLECL BLE5.0 | manual v23-0420 | www.wit-motion.com
- 6 -
1.1 Warning Statement
➢ Putting more than 5 Volt across the sensor wiring of
the main power supply can lead to permanent damage
to the sensor.
➢ For proper instrument grounding: use WITMOTION
with its original factory-made cable or accessories.
➢ Do not access the I2C interface.
➢ Do not change the baud rate because WitMotion
Bluetooth sensor’s baud rate (Defalut 115200) is
fixed.
1.2 LED Status
LED
Status
Remark
Red
Keeping on
Charging (powered by offered Type-C
wire)
Blue
Flashing quickly
Standby
Flashing slowly
Pairing succeeds

WiT WT901BLECL BLE5.0 Specifications

General

Brand	WiT
Model	WT901BLECL BLE5.0
Category	Measuring Instruments
Language	English