To Next Page

To Previous Page

WT901BLECL BLE5.0 | manual v23-0420 | www.wit-motion.com

- 40 -

4.4.3 Placement Direction

The default installation direction of the module is horizontal. When the module

needs to be installed vertically, the vertical installation can be set.

Step 1: Rotate the module 90 degrees around the X-axis

Step 2: Place the sensor 90 degrees vertically

Step 3: Click “Vertical” as install directions on the “Config” menu

Questions and Answers:

Need help?

Do you have a question about the WiT WT901BLECL BLE5.0 and is the answer not in the manual?

WiT WT901BLECL BLE5.0 Specifications

General