EN - 29
Withings Activité™
v3.0 | November, 2015
Cleaning and Maintenance
Cleaning your Withings Activité™
Withings Activité™ Pop / Withings Activité™ Steel
• Use a lint-free cloth moistened with water to clean the glass and casing
of your Withings Activité™ Pop / Withings Activité™ Steel.
• Run the silicone band under water and rub it with hypoallergenic soap to clean it.
• Dry the silicone wristband with a soft cloth.
Withings Activité™
• Use a lint-free cloth moistened with water to clean the glass and casing
of your Withings Activité™.
• Gently rub the leather band with your ngers to remove smudges. It should not
be cleaned or come in contact with water as it will damage the leather.
• Run the silicone band under water and rub it with hypoallergenic soap to clean it.
• Dry the silicone wristband with a soft cloth.
Replacing the Battery
The battery needs to be replaced when the hands stop moving and when the watch no
longer vibrates when you press the reset button.
The Withings Activité™ will run for approximately 8 months on a standard watch battery.
Go to a watchmaker if you want to install the new CR2025 battery. You can nd a list of our
authorized partners at:
http://support.withings.com/activitepop/battery, or
http://support.withings.com/activite/battery.
If the time does not seem correct after replacing the battery, you may need to recalibrate
the hands of your Withings Activité™.
Replacing the Wristband
You need to replace the wristband of your Withings Activité™ for your workout sessions
or before going under water to avoid any damage to the leather. You can easily replace it
thanks to the quick release spring bars with which the wristband is attached.
To do so, perform the following steps:
1. Turn your Withings Activité™ over.
2. Locate the knob of each spring bar.
To Next Page
Loading...
