Wittime WT2022A User Manual (English)

Other manuals for Wittime WT2022A

Questions and Answers:

W
William PayneAug 2, 2025
Why is the Wittime WT2022A Weather Station outdoor temperature showing dashes?
- A
  Aaron DavisAug 2, 2025
  Dashes typically indicate wireless interference. To resolve this, try the following: 1. Turn off the main weather station (remove batteries or unplug the power cord). 2. Remove the batteries from the outdoor sensor. 3. Turn on the main weather station (replace batteries or plug in the power cord). 4. Replace the batteries in the outdoor sensor. 5. Allow the units to sit within a couple of feet of each other for about 20 minutes to establish a strong connection.
D
Derrick WashingtonAug 6, 2025
How to improve temperature and humidity accuracy on Wittime WT2022A Weather Station?
- N
  Nathan OconnorAug 6, 2025
  To improve the accuracy of temperature and humidity readings: * When unpacking for the first time, allow the weather station and sensor to balance with the current ambient temperature for 1-2 hours, as they have been sealed for a long time. * Keep the units away from heat sources. * When comparing readings with other thermometers, place them in the same location and allow them to stand for 1-2 hours. This is very important for accurate comparison.
M
Megan BrewerAug 11, 2025
What to do if Wittime WT2022A is not receiving signal from the wireless sensor?
- J
  James ThomasAug 11, 2025
  If your Wittime Weather Station base unit isn't receiving a signal from the wireless sensor, ensure there are no electrical sources causing interference nearby. Also, check the sensor's batteries. You can manually start the search for the wireless sensor by pressing and holding the CH button on the base unit until the display for the weather information flashes. Consider moving the base unit closer to the sensor, or vice versa.
C
Courtney JohnsonAug 15, 2025
Why is the temperature from my Wittime WT2022A Weather Station sensor too high?
- T
  Terri EllisAug 15, 2025
  If the temperature reading from your Wittime Weather Station sensor seems too high, check whether the sensor is exposed to direct sunlight.
C
Carol ContrerasAug 19, 2025
How to fix a Wittime Weather Station display screen that is not working?
- S
  Shelby CaldwellAug 19, 2025
  If the display screen of your Wittime Weather Station isn't working, check that the batteries in the main unit are correctly inserted or that the power adapter is properly plugged in.