EasyManua.ls Logo

wiwa 500 - Page 2

wiwa 500
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 user's handbook Airless Spray Gun
SP500 • 550001 • e • 05.08
e
1 Contents
First read, then start
Remember that Airless Paint Spra-
ying Equipment works under extreme
pressure and that high levels of spra-
ying pressure are created!
Never hold your nger or hand in front of the
gun and never reach into the spray.
Never point the spray gun towards yourself,
other people or other living creatures.
Always pay close attention to the references
and specications found in the user's hand-
book!
Before each usage, be especially certain to:
Check the grounding conditions (for the unit
and the object to be sprayed).
Check the seal of all connecting and moun-
ted parts.
Observe the maximal allowed pressure of
the unit and accessory parts.
Before beginning any work on the equip-
ment, and at any pause during operation, it
is absolutely required to:
Shut down the spraying equipment in ac-
cordance with the instructions in the User's
Handbook.
Release the pressure found in the spray gun
and hose.
Secure the spray gun.
Pay attention to safety!
The accident prevention regulation "Handling of
Coating Materials" (BGV D25) and the guide-
lines covering uid sprayers (ZH1/406) from the
German Employer's Liability Insurance Associ-
ation are to be observed without fail. To ensure
a safe operating environment, the condition of
uid sprayers must be inspected by an expert
every 12 months or sooner, if deemed necessa-
ry. A written record of the inspection results is to
be kept.
Remaining paint and solvent are to be dispo-
sed of according to legal regulations. This also
applies for environmently friendly water based
lacquer or enamel systems.
In case of injuries, consult a physician or go to
the next hospital without delay. If paint/material
or solvent has gone into the skin, the physician
has to be informed about the type of paint/ma-
terial or the solvent applied. Therefore, always
ensure that the product specication sheet, with
address and telephone number of the manufac-
turer, is at your disposal!
1.1 Preface
This User’s Handbook must always
be available to operating staff!
The operating authority of the equip-
ment must ensure that a user`s hand-
book is available to the operator in a
language which he understands.
Dear customer!
Thank you for your decision to purchase
equipment.
In the user’s handbook, you can nd all infor-
mation required for the proper handling of your
Spray Gun. However, for safe operati-
on, there are further essential details which you
should adhere to:
Please read and observe the guidlines valid for
your country.
In Germany, the "Richtlinien für Flüssigkeits-
strahler" (Guidelines for Fluid Sprayers) publis-
hed by: Hauptverband der Gewerblichen Be-
rufsgenossenschaften (Industrial Employer's
Liability Insurance Association) are valid.
Manufacturer’s notes and operating guidelines
for coating and pumping materials should be
observed at all times.
No method of operation should be exercised
which impairs the safety of products
and the operating personnel.
We wish you much success and excellent work-
ing results when using your Spray
Gun.
WIWA Wilhelm Wagner GmbH & Co. KG

Related product manuals