EasyManua.ls Logo

wiwa OPTIMA 2100 User Manual

wiwa OPTIMA 2100
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Translation of the original operation manual
SPAC_Optima2100_1302_en • 0550012 • jw
Operation manual
Air Combi SPrAY GUN
oPTimA 2100
Question and Answer IconNeed help?

Do you have a question about the wiwa OPTIMA 2100 and is the answer not in the manual?

wiwa OPTIMA 2100 Specifications

General IconGeneral
Brandwiwa
ModelOPTIMA 2100
CategoryPaint Sprayer
LanguageEnglish

Summary

Preface

Safety

2.1 First read, then start

Safety instructions for initial operation.

2.2 Description of symbols

Explains the meaning of symbols used in the manual.

2.3 Dangers caused by rebuilds and changes

Hazards from unauthorized modifications to the equipment.

2.4 Dangers caused by attachments and spare parts

Risks from using non-original or incompatible parts.

2.5 Dangers caused by emissions

Potential health and property damage from solvent vapors.

2.6 Safety instructions

Critical guidelines for safe operation and handling.

2.7 Operating staff

Requirements and qualifications for personnel operating the equipment.

2.8 Safety measures at installation site

Precautions for the workplace and lightning protection.

2.9 Safety equipment

Importance and function of safety devices on the spray gun.

Description of equipment

3.1 Intended use

Specifies the purpose and application of the spray gun.

3.2 Assembly details

Visual guide and list of components of the spray gun assembly.

3.3 Technical data

Specifications, pressure, temperature, and consumption values.

Setting-up

Installation of the spray tip

Steps for correctly installing the spray tip.

Operation

Notes about operating pressure

Guidance on optimal pressure settings for quality coating.

Tips for Spraying - Painting

Techniques for achieving even coating and proper gun movement.

Adjusting the flat stream

How to adjust the atomizing air for the flat spray pattern.

Adjusting the round stream

How to reshape the flat stream into a round pattern.

Regulating the spring pressure

Adjusting spring preload based on fluid pressure.

Adjusting the direction of the Flat Stream

How to set the spray pattern direction.

Adjusting the atomizing air

Details on how atomizing air works with the trigger.

Disturbances during operation and trouble-shooting

Decrease in paint flow when spraying

Common causes and solutions for reduced paint flow.

Irregular spray pattern

Troubleshooting steps for inconsistent spray patterns.

Spray tip plugs continuously

Reasons and remedies for clogged spray tips.

Maintenance and repair

Lubrication

Recommended lubrication points and materials for the spray gun.

Cleaning

Procedures for cleaning the spray gun after use.

Cleaning the spray tip

Steps to clean or replace the spray tip.

Cleaning the filter

How to clean the filter to prevent blockages.

Exchanging parts

General precautions and steps for replacing parts.

Replacing the Needle

Detailed instructions for replacing the needle.

Replacing the Needle seal (Cap collar)

Procedure for replacing the needle seal and cap collar.

Replacing the valve gland seal

Steps for replacing the valve gland seal.

Replacing the spray tip

Instructions for removing and reinstalling the spray tip.

Disassembly

Replacing the gasket (Gasket holding screw)

How to replace the gasket on the holding screw.

Disposal

Disposal of auxiliary materials

Guidelines for disposing of paint, solvents, oils, and greases.

Spare parts lists

Air Combi Spray Gun (without tip)

List of spare parts for the spray gun model without a tip.

Air Combi Spray Gun (with tip)

List of spare parts for the spray gun model with a tip.

Related product manuals