WLINK WL-R320 Series User Manual

WL-R320 Series Router User Manual
25
Parameter
Instruction
Default
Interface
WAN/LTE/VPN interface Options
WAN
Status
Enable/Disable Options
ON
ICMP Access
Indicate the ordinal of the list.
OFF
Telnet/SSH/WEB
Access
Enable/Disable Telnet/SSH/WEB remote access
Disable
ICMP Through
Enable/Disable ICMP Through
Enable
NAT Through
Configure external port of router which can be accessed by
other hosts from internet.
Enable
Default Action
Accept/Drop Options
Drop
Name(unique)
Indicate the ordinal of the list.
Null
Extranet Address
Defines if access is allowed from one or a range of IP
addresses which are defined by Source IP Address, or every
IP addresses.
Null
Intranet Address
The destination address inside the LAN.
Null
Protocol
TCP, UDP and ALL options
Null
Intranet Port
The destination port inside the LAN.
Null
Action
Accept and Drop
Step 2 Please Click “Apply“ to finish.
----End

WLINK WL-R320 Series Specifications

General

Brand	WLINK
Model	WL-R320 Series
Category	Network Router
Language	English