Care | Manual cleaning
6.4.3 Clean the drip tray
Scalding hazard
• The drip tray may contain hot liquids.
• If the drip tray is not properly engaged, such
as after cleaning, there is aburn hazard due
to hot liquids.
> Move the drip tray carefully.
> Replace carefully so that no water
accidentally drips down.
> Always make sure the drip tray is seated
correctly.
Lift up the front of the drip tray slightly and
removeit
Clean drip tray thoroughly
Rinse the drip tray with clear drinking water
Dry off the drip tray and replace it
6.4.4 Clean the housing
• There is arisk of causing scratches or scores.
> Do not clean with scouring powders or the
like.
> Do not use any sharp cleaners or
implements.
> Use soft cloths for cleaning.
For cleaning metal cover parts (matte surface) we
recommend WMFPurargan® cleaner.
CAUTION
Follow the Safety chapter
w starting on page 6
IMPORTANT
Observe the Warranty chapter
w starting on page 84