Care | Manual cleaning
Lift bean hoppers out
Completely empty bean hoppers and wipe out
thoroughly with adamp cloth
Allow the bean hoppers to dry completely
Refill and replace bean hoppers
Use the multitool to rotate the lock clockwise to
close it
6.4.9 Clean the powder hopper
Cleaning will be more frequent depending on powder
consumption.
Slide the operating panel upward
The ON/OFF switch is on the right side, behind the
operating panel.
Press the ON/OFF switch until coffee machine
switches off
Disconnect mains plug
Use the multitool to turn the lock on the powder
hopper counterclockwise to open it
Tip hopper backwards and remove upwards
Empty hopper completely
To Next Page
Loading...
