Need help?Do you have a question about the WMT CK6132 and is the answer not in the manual?
General| Model | CK6132 |
|---|---|
| Type | CNC Lathe |
| Swing Over Bed | 320 mm |
| Swing Over Carriage | 180 mm |
| Distance Between Centers | 750 mm |
| Spindle Bore | 52 mm |
| Spindle Speed Range | 100-2500 RPM |
| Max Turning Length | 650 mm |
| Spindle Taper | MT6 |
| Tool Post | 4-Station |
Core safety rules for power tool users, covering basic operation, environment, and personal protective measures.
Additional safety rules focusing on tool maintenance, accessory use, condition checks, and operational vigilance.
Essential safety protocols specifically for operating a CNC lathe, emphasizing operator actions and machine interaction.
Details the lathe's primary applications, technical specifications, and diagrams.
Lists the main components of the lathe with their quantities.
Explains the main structural components, transmission, and lubrication systems of the lathe.
Provides guidelines for safely transporting and installing the machine.
Covers procedures for adjusting machine components and performing routine maintenance tasks.
Outlines the general power, motor, and lighting specifications for the CNC lathe.
Specifies the required power conditions and environmental parameters for electrical components.
Details essential checks for personnel and equipment safety before connecting to power.
Refers to external manuals for the structure of the CNC controlling system's software and hardware.
To Next Page