9. Logger / data transfer
The menu item Log/IR initiates subprograms that control the long-term data
registration (logging) and its infrared output or transfer.
9.1 Data transfer to a PC
The menu item Log/IR —> IrDA is used to transfer stored measured values
and records to a PC.
The contents stored in the DC 2000
PRO
are transferred to a PC via the infrared
interface (order no. 9631 serial or 9318 USB or Bluelink 500).
Table 4 – Example receive sequence: channel no. + measured value
303025/01/0213:38:19 Start: channel no. 3030 + date and time
3031 107.35 Channel no. 3031 + measured pressure in mbar
3038 22.0 Channel no. 3038 + external temperature in °C
3041 22.0 Channel no. 3041 + internal temperature in °C
3040 40 Channel no. 3040 + relative humidity in %
303025/01/0213:48:19 Stop: channel no. 3030 + date and time
9. Logger/data transfer
Fig. 9.1
Fig. 9.2
To Next Page
Loading...
